In the sector of residual municipal solid waste management an increasing attention is put towards the role of biological treatments like bio-drying and bio-stabilization in order to decrease the need of landfilling volumes. The literature shows a lack of information concerning the emission factor of pollutants released from these processes. The available data are generally spot characterizations of concentration and air flow-rate that are used together in order to assess the emission factors. This approach caused significant differences among the available data as the release of pollutants is not steady. This paper belongs to a group of six papers concerning a research on material and energy recovery in integrated waste management systems, developed by a network of five universities. The contribution of the University of Trento, focuses on the bio-drying process with the following targets: (a) developing an innovative low cost method of sampling/measurement able to take into account the dynamics of release of pollutants; (b) checking the efficiency of a bio-filter; (c) verifying the variability of generation of some pollutants; (d) generating emission factors. The research was developed using a bio-drying pilot plant. As a treatment of the process air, the bio-reactor was coupled with a bio-filter. The emissions were characterized using an original approach based on the adoption of two measurement chambers suitable for hosting passive samplers. The passive samplers allowed the characterization of VOCs, N 2O, NH 3 and H 2S. A bio-chemical model, useful for energy and mass balances, supported the interpretation of the presented bio-drying run.
Scheda prodotto non validato
I dati visualizzati non sono stati ancora sottoposti a validazione formale da parte dello Staff di IRIS, ma sono stati ugualmente trasmessi al Sito Docente Cineca (Loginmiur).
|Titolo:||Material and energy recovery in integrated waste management systems: An innovative approach for the characterization of the gaseous emissions from residual MSW bio-drying|
|Autori:||Ragazzi, Marco; Rada, Elena Cristina; Antolini, Daniele|
|Titolo del periodico:||WASTE MANAGEMENT|
|Anno di pubblicazione:||2011|
|Numero e parte del fascicolo:||9-10|
|Codice identificativo Scopus:||2-s2.0-79960945939|
|Codice identificativo Pubmed:||21482095|
|Codice identificativo ISI:||WOS:000294573500021|
|Digital Object Identifier (DOI):||http://dx.doi.org/10.1016/j.wasman.2011.02.024|
|Appare nelle tipologie:||03.1 Articolo su rivista (Journal article)|