Combined photothermal-hygroscopic effects enable novel materials actuation strategies based on renewable and sustainable energy sources such as sunlight. Plasmonic nanoparticles have gained considerable interest as photothermal agents, however, the employment in sunlight-driven photothermal-hygroscopic actuators is still bounded, mainly due to the limited absorbance once integrated into nanocomposite actuators and the restricted plasmonic peaks amplitude (compared to the solar spectrum). Herein, the design and fabrication of an AgNPs-based plasmonic photothermal-hygroscopic actuator integrated with printed cellulose tracks are reported (bioinspired to Geraniaceae seeds structures). The nanocomposite is actuated by sunlight power density (i.e., 1 Sun = 100 mW cm(-2)). The plasmonic AgNPs are in situ synthesized on the PDMS surface through a one-step and efficient fluoride-assisted synthesis (surface coverage approximate to 40%). The nanocomposite has a broadband absorbance in the VIS range (>1) and a Photothermal Conversion Efficiency approximate to 40%. The actuator is designed exploiting a mechanical model that predicted the curvature and forces, featuring a approximate to 6.8 +/- 0.3 s response time, associated with a approximate to 43% change in curvature and a 0.76 +/- 0.02 mN force under 1 Sun irradiation. The plasmonic nanocomposite actuator can be used for multiple tasks, as hinted through illustrative soft robotics demonstrators, thus fostering a bioinspired approach to developing embodied energy systems driven by sunlight.

A Bioinspired Plasmonic Nanocomposite Actuator Sunlight‐Driven by a Photothermal‐Hygroscopic Effect for Sustainable Soft Robotics / Mariani, Stefano; Cecchini, Luca; Mondini, Alessio; Del Dottore, Emanuela; Ronzan, Marilena; Filippeschi, Carlo; Pugno, Nicola Maria; Sinibaldi, Edoardo; Mazzolai, Barbara. - In: ADVANCED MATERIALS TECHNOLOGIES. - ISSN 2365-709X. - 2023, 8:14(2023), pp. 1-10. [10.1002/admt.202202166]

A Bioinspired Plasmonic Nanocomposite Actuator Sunlight‐Driven by a Photothermal‐Hygroscopic Effect for Sustainable Soft Robotics

Cecchini, Luca;Pugno, Nicola Maria;
2023-01-01

Abstract

Combined photothermal-hygroscopic effects enable novel materials actuation strategies based on renewable and sustainable energy sources such as sunlight. Plasmonic nanoparticles have gained considerable interest as photothermal agents, however, the employment in sunlight-driven photothermal-hygroscopic actuators is still bounded, mainly due to the limited absorbance once integrated into nanocomposite actuators and the restricted plasmonic peaks amplitude (compared to the solar spectrum). Herein, the design and fabrication of an AgNPs-based plasmonic photothermal-hygroscopic actuator integrated with printed cellulose tracks are reported (bioinspired to Geraniaceae seeds structures). The nanocomposite is actuated by sunlight power density (i.e., 1 Sun = 100 mW cm(-2)). The plasmonic AgNPs are in situ synthesized on the PDMS surface through a one-step and efficient fluoride-assisted synthesis (surface coverage approximate to 40%). The nanocomposite has a broadband absorbance in the VIS range (>1) and a Photothermal Conversion Efficiency approximate to 40%. The actuator is designed exploiting a mechanical model that predicted the curvature and forces, featuring a approximate to 6.8 +/- 0.3 s response time, associated with a approximate to 43% change in curvature and a 0.76 +/- 0.02 mN force under 1 Sun irradiation. The plasmonic nanocomposite actuator can be used for multiple tasks, as hinted through illustrative soft robotics demonstrators, thus fostering a bioinspired approach to developing embodied energy systems driven by sunlight.
2023
14
Mariani, Stefano; Cecchini, Luca; Mondini, Alessio; Del Dottore, Emanuela; Ronzan, Marilena; Filippeschi, Carlo; Pugno, Nicola Maria; Sinibaldi, Edoar...espandi
A Bioinspired Plasmonic Nanocomposite Actuator Sunlight‐Driven by a Photothermal‐Hygroscopic Effect for Sustainable Soft Robotics / Mariani, Stefano; Cecchini, Luca; Mondini, Alessio; Del Dottore, Emanuela; Ronzan, Marilena; Filippeschi, Carlo; Pugno, Nicola Maria; Sinibaldi, Edoardo; Mazzolai, Barbara. - In: ADVANCED MATERIALS TECHNOLOGIES. - ISSN 2365-709X. - 2023, 8:14(2023), pp. 1-10. [10.1002/admt.202202166]
File in questo prodotto:
File Dimensione Formato  
590-ADMT-A_bioinspired_plasmonic.pdf

accesso aperto

Tipologia: Versione editoriale (Publisher’s layout)
Licenza: Creative commons
Dimensione 5.75 MB
Formato Adobe PDF
5.75 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/437091
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 10
  • ???jsp.display-item.citation.isi??? 12
  • OpenAlex ND
social impact