The influence of the microstructure of uniaxial cold-compacted green iron on the sintering shrinkage was investigated. Pores in the green parts are very slightly oriented, while the dimension of the interparticle contact areas is anisotropic. A large and anisotropic anisothermal shrinkage in alpha iron was measured, greater than isothermal shrinkage at the 1120°C. The results were interpreted on the basis of the geometrical and of the structural activity, and the effective diffusivity responsible for neck growth was determined.

Sintering shrinkage of uniaxial cold compacted iron: influence of the microstructure on the anisothermal and isothermal shrinkage of uniaxial cold-compacted iron / Baselli, S., Torresani, E., Zago, M., Amirabdollahian, S., Cristofolini, I., Molinari, A.. - In: POWDER METALLURGY. - ISSN 0032-5899. - 61:4(2018), pp. 276-284. [10.1080/00325899.2018.1500783]

Sintering shrinkage of uniaxial cold compacted iron: influence of the microstructure on the anisothermal and isothermal shrinkage of uniaxial cold-compacted iron

Baselli, Silvia;E. Torresani;M. Zago;S. Amirabdollahian;I. Cristofolini;A. Molinari
2018-01-01

Abstract

The influence of the microstructure of uniaxial cold-compacted green iron on the sintering shrinkage was investigated. Pores in the green parts are very slightly oriented, while the dimension of the interparticle contact areas is anisotropic. A large and anisotropic anisothermal shrinkage in alpha iron was measured, greater than isothermal shrinkage at the 1120°C. The results were interpreted on the basis of the geometrical and of the structural activity, and the effective diffusivity responsible for neck growth was determined.
2018
4
Baselli, Silvia; Torresani, E.; Zago, M.; Amirabdollahian, S.; Cristofolini, I.; Molinari, A.
Sintering shrinkage of uniaxial cold compacted iron: influence of the microstructure on the anisothermal and isothermal shrinkage of uniaxial cold-compacted iron / Baselli, S., Torresani, E., Zago, M., Amirabdollahian, S., Cristofolini, I., Molinari, A.. - In: POWDER METALLURGY. - ISSN 0032-5899. - 61:4(2018), pp. 276-284. [10.1080/00325899.2018.1500783]
File in questo prodotto:
File Dimensione Formato  
POM 2018_4.pdf

Solo gestori archivio

Tipologia: Versione editoriale (Publisher’s layout)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 2.12 MB
Formato Adobe PDF
2.12 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/211155
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 16
  • ???jsp.display-item.citation.isi??? 12
  • OpenAlex ND
social impact