Zago, Marco

Zago, Marco  

Ingegneria industriale (29/10/12-)  

Mostra records
Risultati 1 - 20 di 36 (tempo di esecuzione: 0.027 secondi).
Titolo Anno di pubblicazione Autori Unitn File
3D Tracking of Human Motion Using Visual Skeletonization and Stereoscopic Vision 1-gen-2020 Zago M.De Cecco M. +
A study of the anisotropy of dimensional change in the compaction plane during sintering of low alloyed cold compacted steels 1-gen-2023 Zago, MarcoCristofolini, Ilaria +
An Improved Design Method for Net-shape Manufacturing in Powder Metallurgy 1-gen-2020 Zago, MarcoCristofolini, Ilaria +
Analysis of the causes determining dimensional and geometrical errors in 316L and 17-4PH stainless steel parts fabricated by metal binder jetting 1-gen-2024 Zago, MarcoCristofolini,Ilaria +
Analysis of the Flatness Form Error in Binder Jetting Process as Affected by the Inclination Angle 1-gen-2022 Zago, MarcoCristofolini, Ilaria +
Anisotropic sintering shrinkage of ring shaped iron parts: effect of geometry and green density and correlation to the stress field during uniaxial cold compaction. 1-gen-2017 A. MolinariZago, MarcoS. AmirabdollahianI. Cristofolini +
Assessment of the Achievable Dimensional Tolerances in 17-4PH Stainless Steel Parts Fabricated by Metal Binder Jetting 1-gen-2024 Zago, MarcoCristofolini, Ilaria
Design for anisotropic dimensional change: new insight and practical approach 23-giu-2020 Zago, Marco
Design for Powder Metallurgy: Predicting Anisotropic Dimensional Change on Sintering of Real Parts 1-gen-2019 I. CristofoliniA. MolinariM. ZagoS. Amirabdollahian +
Design For Sintering 2 Club Project - Anisotropy Of Dimensional Changes In The Compaction Plane As Affected By Compaction Strategy 1-gen-2023 Zago, MarcoCristofolini, Ilaria +
Design for sintering club project – dealing with the anisotropy of dimensional changes in real parts 1-gen-2018 Ilaria CristofoliniAlberto MolinariMarco ZagoSasan Amirabdollahian +
Designing powder metallurgy process: The influence of high sintering temperature on dimensional and geometrical precision 1-gen-2021 Zago, MarcoCristofolini, IlariaAmirabdollahian, Sasan
Development of a new model describing the anisotropic dimensional change on sintering 1-gen-2022 Cristofolini, IlariaMolinari, AlbertoZago, MarcoUcak, Onur Utku +
Dimensional and geometrical precision of parts produced by binder jetting process as affected by the anisotropic shrinkage on sintering 1-gen-2021 Zago, MarcoCristofolini, Ilaria +
Dimensional metrology of additively manufactured lattice structures by combined tactile probe and X‐ray tomography 1-gen-2021 Cristofolini, IlariaZago, MarcoBenedetti, Matteo +
Effect of geometry and green density on the anisotropic sintering shrinkage of axisymmetric iron parts 1-gen-2018 Molinari, AlbertoAmirabdollahian, SasanZago, MarcoCristofolini, Ilaria +
Filling Density and Geometrical Precision of Ring-Shaped Parts: Effects of the Filling Strategy 1-gen-2022 Zago, MarcoCristofolini, Ilaria +
Filling Density and Green Density of different ring-shaped parts as affected by filling strategy 1-gen-2022 Zago, MarcoCristofolini, Ilaria +
From compaction mechanics to sintering shrinkage of rings with different H/(Dext-Dint) ratio 1-gen-2018 Alberto MolinariMarco ZagoAmirabdollahian, SasanIlaria Cristofolini
Geometrical Issues in Design for Binder Jetting – The Effect of Anisotropic Dimensional Change on Sintering 1-gen-2022 Zago, MarcoCristofolini, Ilaria +