Si sono prodotti materiali a base di MgH2-Al per lo stoccaggio di idrogeno, in particolare per valutare la loro resistenza alla fessurazione durante le operazioni di assorbimento-desorbimento. Il processo di produzione è costituito da diversi stadi, comprendendo la macinazione criogenica dell'alluminio, la sua miscelazione con MgH2 e la successiva compattazione delle polveri mediante la tecnologia Spark Plasma Sintering. Test di fessurazione e disgregazione sono stati condotti sulla base di diversi cicli di assorbimento-desorbimento di idrogeno. la struttura dei campioni rimane inalterata anche se la capacità di stoccaggio diminuisce a seguito della formazione della fase intermetallica Mg17Al12.
This research work presents a powder metallurgy (PM) route for the production of a hydrogen storage MgH2-Al composite material. This system has been considered to avoid one of the main problems of bulk materials for chemical hydrogen storage, that is decrepitation. The process involves several steps, like cryomilling of pure Al, mixing with MgH2and compaction of the powder blends by Spark Plasma Sintering (SPS). The first part of the work was focused on the optimization of the aluminum scaffold. Cryomilling of aluminum was carried out in order to reduce the crystallite size to the range of nanometers. Pure aluminum specimens were sintered with two different sets of sintering parameters in order to investigate their effect on the properties of the matrix material after the sintering process. Then, a bulk composite consisting of MgH2 and 20 wt.% Al was produced in order to evaluate the resistance to decrepitation. In spite of the comminution of the MgH2 particle size after three hydrogen absorption/desorption cycles, the overall structure is faultless due to the reinforcement introduced by aluminum. Furthermore, aluminum retained its nanocrystalline character during temperature cycling. However, the sample during absorption/desorption cycling showed a reduced hydrogen storage behavior, caused by the formation of the highly stable intermetallic phase Mg17Al12 as well as by a partial oxidation of Mg. © 2008 Elsevier B.V. All rights reserved.
A powder metallurgy approach for the production of a MgH2-Al composite material / A., G., Ceccato, R., Lonardelli, I., Girardi, F., F., A., G., P., Molinari, A., Gialanella, S.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - STAMPA. - 478:1-2(2009), pp. 273-280. [10.1016/j.jallcom.2008.12.032]
A powder metallurgy approach for the production of a MgH2-Al composite material
Ceccato, Riccardo;Lonardelli, Ivan;Girardi, Fabrizio;Molinari, Alberto;Gialanella, Stefano
2009-01-01
Abstract
This research work presents a powder metallurgy (PM) route for the production of a hydrogen storage MgH2-Al composite material. This system has been considered to avoid one of the main problems of bulk materials for chemical hydrogen storage, that is decrepitation. The process involves several steps, like cryomilling of pure Al, mixing with MgH2and compaction of the powder blends by Spark Plasma Sintering (SPS). The first part of the work was focused on the optimization of the aluminum scaffold. Cryomilling of aluminum was carried out in order to reduce the crystallite size to the range of nanometers. Pure aluminum specimens were sintered with two different sets of sintering parameters in order to investigate their effect on the properties of the matrix material after the sintering process. Then, a bulk composite consisting of MgH2 and 20 wt.% Al was produced in order to evaluate the resistance to decrepitation. In spite of the comminution of the MgH2 particle size after three hydrogen absorption/desorption cycles, the overall structure is faultless due to the reinforcement introduced by aluminum. Furthermore, aluminum retained its nanocrystalline character during temperature cycling. However, the sample during absorption/desorption cycling showed a reduced hydrogen storage behavior, caused by the formation of the highly stable intermetallic phase Mg17Al12 as well as by a partial oxidation of Mg. © 2008 Elsevier B.V. All rights reserved.| File | Dimensione | Formato | |
|---|---|---|---|
|
2009_MgH2-Alcomposite_JALCOM.pdf
Solo gestori archivio
Tipologia:
Versione editoriale (Publisher’s layout)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
1.42 MB
Formato
Adobe PDF
|
1.42 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione



