Effect of Al and Ce doping on the deformation upon sintering in sequential tape cast layers for solid oxide fuel cells

Water-based tape casting is an attractive production route for planar solid oxide fuel cells (SOFCs) due to its high productivity and reduced environmental issues. In this work planar anode supported SOFCs with thin electrolyte were prepared by water-based sequential tape casting and co-sintering. An in situ high temperature monitoring apparatus was assembled to allow the determination of free sintering shrinkage of thin green tape cast layers and to follow the curvature developed in multilayers during the entire sintering process. The instantaneous curvature developed upon co-sintering was studied as a function of the firing sched- ule and layer composition. It was found that by tailoring the electrode composition it is possible to reduce the shrinking rate difference between anode and electrolyte thus obtaining defect-free electrolyte, min- imising the residual curvature of the half-cell and improving the electrochemical performances of the cell.