Creep crack growth in a short glass fibres reinforced polypropylene composite

In this paper the creep crack propagation in a short glass fibre reinforced polypropylene composite has been investigated at various temperatures in the range from 32 to 60°C. Creep crack speed (da/dt) resulted initially decreasing till a minimum value, and then gradually increasing up to instability and fracture. Both initial and minimum crack speed values were found to strongly increase as test temperature increased. Moreover, isothermal curves of the applied stress intensity factor Kappl as a function of the crack speed (da/dt) were obtained at various temperatures. Portions of these curves in the stable crack acceleration region were hence shifted along the da/dt, axis according to a time-temperature reduction scheme, thus allowing the construction of a creep crack propagation master curve. The shift factor values, aT, for the creep crack propagation master curve appeared to be higher than those obtained, in the same temperature range, from dynamic mechanical measurements in a linear viscoelastic regime. © 2001 Kluwer Academic Publishers.