Coupling of hydraulic and mechanical behaviour in unsaturated compacted clay

An experimental study was carried out to investigate the shear strength of a compacted non-active clay (Speswhite kaolin). A total of 33 statically compacted specimens were prepared, at vertical stresses of 300, 600 and 1200 kPa and water contents ranging from 0.24 to 0.34. This made it possible to explore a broad range of initial compactioninduced conditions and hence to examine whether differences in water retention characteristics and shear strength are due to differences in initial compactioninduced state or are to be attributed to fundamentally different microfabrics. A shearbox was modified to allow the direct measurement of negative pore water pressure using Trento high-suction tensiometers. Tests were carried out at constant water content by monitoring suction changes. In these tests, it was possible to investigate the transition from unsaturated to saturated states. In the first stage of the test, the specimen was compressed at constant water content. The specimen was therefore wetted, in the sense that its degree of saturation increased. Compression data were then used to investigate the influence of void ratio on the main wetting curve. Shear data were used to put forward a critical state framework for unsaturated compacted clay. This is described by three equations linking shear stress, normal total stress, suction, void ratio and water ratio