This thesis investigates the development and engineering of semiconductor materials and electrocatalysts for photoelectrochemical (PEC) applications aimed at green hydrogen (H₂) production and environmental remediation. In the first part, a titanium-doped hematite (Ti:α-Fe₂O₃) photoanode is employed to demonstrate simultaneous H₂ generation and radical mineralization to CO₂ of the surfactant sodium dodecyl sulfate (SDS) in wastewater. In the second part, a tantalum nitride (Ta₃N₅) photoanode is developed for alkaline PEC water splitting: Ti doping (2 at.%) reduces intrinsic defects and enhances photocurrent, while the deposition of an amorphous NiFeOₓ co-catalyst and a thin protective TiO₂ interlayer enables operation without hole scavengers by mitigating surface self-oxidation. Finally, carbon-based electrodes derived from the hydrothermal carbonization of glucose are evaluated as sustainable, low-cost conductive substrates.
Tailoring semiconductor properties for Photoelectrochemical applications: from materials development to green hydrogen production and wastewater remediation / Chesini, A.. - (2026 Nov 20).
Tailoring semiconductor properties for Photoelectrochemical applications: from materials development to green hydrogen production and wastewater remediation
Chesini, Alessandro
2026-11-20
Abstract
This thesis investigates the development and engineering of semiconductor materials and electrocatalysts for photoelectrochemical (PEC) applications aimed at green hydrogen (H₂) production and environmental remediation. In the first part, a titanium-doped hematite (Ti:α-Fe₂O₃) photoanode is employed to demonstrate simultaneous H₂ generation and radical mineralization to CO₂ of the surfactant sodium dodecyl sulfate (SDS) in wastewater. In the second part, a tantalum nitride (Ta₃N₅) photoanode is developed for alkaline PEC water splitting: Ti doping (2 at.%) reduces intrinsic defects and enhances photocurrent, while the deposition of an amorphous NiFeOₓ co-catalyst and a thin protective TiO₂ interlayer enables operation without hole scavengers by mitigating surface self-oxidation. Finally, carbon-based electrodes derived from the hydrothermal carbonization of glucose are evaluated as sustainable, low-cost conductive substrates.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione



