This study investigates the fracture behavior of co-bonded joints between Carbon Fiber Reinforced Polymers (CFRP) and 316L stainless steel manufactured by Laser Powder Bed Fusion, aiming to improve the mechanical performance of bi-material joints. Metal adherends incorporate surface lattice patterns to promote mechanical interlocking between two materials without requiring additional surface preparation. Mode I fracture toughness is evaluated through Double Cantilever Beam (DCB) tests, supported by post-mortem analysis. Among the investigated topologies, the TPMS Gyroid patterned interface achieved a fracture toughness of 1992 ± 129 J/m2, showing good agreement with the cohesive fracture toughness reported in the literature for this adhesive in co-bonded joints. This superior performance, compared with simple cubic topologies, is driven by its unique morphology, which resists adhesive drainage during curing and preserves a continuous, adhesive-rich interface layer. In contrast, two Simple Cubic (SC) unit cell configurations with different aspect ratios exhibited significantly lower fracture toughnesses of 1311 ± 96 J/m2 and 1159 ± 114 J/m2 , representing a 34% to 42% reduction relative to the TPMS Gyroid. A homogenized 3D finite element model of DCB tests, which includes 3D elasto-plastic behavior and a Cohesive Zone Model, successfully reproduces the experimental load–displacement curve. Overall, this study demonstrates that surface lattice patterns in bi-material joints effectively anchor and retain the adhesive within the interface cavities, with TPMS Gyroid significantly enhancing Mode I fracture toughness compared to the SC unit cell, while elasto-plastic homogenization of the adhesive infilled unit cells offers a prospective computational advantage while maintaining accurate FE modeling of bi-material joints.

Mode I fracture behavior of co-bonded CFRP to 316L joints with additively manufactured lattice-patterned interfaces: Effects of architecture and an elasto-plastic homogenization framework / Corrado, A., De Araujo Alves Lima, R., Van Innis, C., Perini, M., Teixeira De Freitas, S., Benedetti, M.. - In: THEORETICAL AND APPLIED FRACTURE MECHANICS. - ISSN 0167-8442. - 149:(2027). [10.1016/j.tafmec.2026.106089]

Mode I fracture behavior of co-bonded CFRP to 316L joints with additively manufactured lattice-patterned interfaces: Effects of architecture and an elasto-plastic homogenization framework

Corrado, Andrea;Benedetti, Matteo
2027-01-01

Abstract

This study investigates the fracture behavior of co-bonded joints between Carbon Fiber Reinforced Polymers (CFRP) and 316L stainless steel manufactured by Laser Powder Bed Fusion, aiming to improve the mechanical performance of bi-material joints. Metal adherends incorporate surface lattice patterns to promote mechanical interlocking between two materials without requiring additional surface preparation. Mode I fracture toughness is evaluated through Double Cantilever Beam (DCB) tests, supported by post-mortem analysis. Among the investigated topologies, the TPMS Gyroid patterned interface achieved a fracture toughness of 1992 ± 129 J/m2, showing good agreement with the cohesive fracture toughness reported in the literature for this adhesive in co-bonded joints. This superior performance, compared with simple cubic topologies, is driven by its unique morphology, which resists adhesive drainage during curing and preserves a continuous, adhesive-rich interface layer. In contrast, two Simple Cubic (SC) unit cell configurations with different aspect ratios exhibited significantly lower fracture toughnesses of 1311 ± 96 J/m2 and 1159 ± 114 J/m2 , representing a 34% to 42% reduction relative to the TPMS Gyroid. A homogenized 3D finite element model of DCB tests, which includes 3D elasto-plastic behavior and a Cohesive Zone Model, successfully reproduces the experimental load–displacement curve. Overall, this study demonstrates that surface lattice patterns in bi-material joints effectively anchor and retain the adhesive within the interface cavities, with TPMS Gyroid significantly enhancing Mode I fracture toughness compared to the SC unit cell, while elasto-plastic homogenization of the adhesive infilled unit cells offers a prospective computational advantage while maintaining accurate FE modeling of bi-material joints.
2027
Settore ING-IND/14 - Progettazione Meccanica e Costruzione di Macchine
Settore IIND-03/A - Progettazione meccanica e costruzione di macchine
Corrado, Andrea; De Araujo Alves Lima, Rosemere; Van Innis, Charline; Perini, Matteo; Teixeira De Freitas, Sofia; Benedetti, Matteo
Mode I fracture behavior of co-bonded CFRP to 316L joints with additively manufactured lattice-patterned interfaces: Effects of architecture and an elasto-plastic homogenization framework / Corrado, A., De Araujo Alves Lima, R., Van Innis, C., Perini, M., Teixeira De Freitas, S., Benedetti, M.. - In: THEORETICAL AND APPLIED FRACTURE MECHANICS. - ISSN 0167-8442. - 149:(2027). [10.1016/j.tafmec.2026.106089]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/511452
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
  • OpenAlex ND
social impact