Microplastics (MPs) pose a significant threat to aquatic ecosystems and global sustainability due to their persistence, widespread presence, and potential to cross biological barriers, transferring through food chains. Wastewater treatment plants are primary pathways for MPs entering aquatic environments, underscoring the need for effective removal technologies before effluent discharge. This study aims to develop a novel, sustainable approach based on Flow Cytometry (FCM) for monitoring biochar-based filtration and rapidly enumerating removed MPs within the 1–5 μm range. While commonly used in medical fields, FCM's application in environmental monitoring, particularly for MPs, is relatively new. Here, FCM was used to assess the effectiveness of biochar derived from spent coffee grounds (SCG) as a low-cost, eco-friendly adsorbent for MP removal from secondary-treated wastewater. Filtration experiments with short contact times revealed that SCG-biochar achieved nearly 100 % removal efficiency for MPs sized 2.0 μm and larger, across an initial concentration range of 8 to 18 mg/L. For more challenging 1.0 μm MPs, at an initial concentration of 1.4 mg/L, biochar exhibited around 49.0 ± 1.2 % removal efficiency when exposed to wastewater, significantly outperforming traditional sand filters. Moreover, SCG-biochar accumulated at least 8.5 mg of 1.0 μm MPs per kg of biochar, equivalent to 1E+9 1.0-μm MP/kg. Notably, < 1.5 % of retained MPs were remobilized during post-filtration flushing. Microscopic analysis further revealed that MPs of various sizes were immobilized deep within the biochar's intricate pore structures, highlighting its potential as a robust and efficient solution for sustainable wastewater treatment, particularly in advanced filtration technologies.
Enhanced removal of small microplastics (1–5 μm) from secondary-treated wastewater using Spent Coffee Grounds biochar: Application of flow cytometry / Torboli, Alessia; Foladori, Paola; Bruni, Laura. - In: JOURNAL OF WATER PROCESS ENGINEERING. - ISSN 2214-7144. - STAMPA. - 71:(2025), pp. 10727001-10727014. [10.1016/j.jwpe.2025.107270]
Enhanced removal of small microplastics (1–5 μm) from secondary-treated wastewater using Spent Coffee Grounds biochar: Application of flow cytometry
Torboli, Alessia
Primo
;Foladori, PaolaSecondo
;
2025-01-01
Abstract
Microplastics (MPs) pose a significant threat to aquatic ecosystems and global sustainability due to their persistence, widespread presence, and potential to cross biological barriers, transferring through food chains. Wastewater treatment plants are primary pathways for MPs entering aquatic environments, underscoring the need for effective removal technologies before effluent discharge. This study aims to develop a novel, sustainable approach based on Flow Cytometry (FCM) for monitoring biochar-based filtration and rapidly enumerating removed MPs within the 1–5 μm range. While commonly used in medical fields, FCM's application in environmental monitoring, particularly for MPs, is relatively new. Here, FCM was used to assess the effectiveness of biochar derived from spent coffee grounds (SCG) as a low-cost, eco-friendly adsorbent for MP removal from secondary-treated wastewater. Filtration experiments with short contact times revealed that SCG-biochar achieved nearly 100 % removal efficiency for MPs sized 2.0 μm and larger, across an initial concentration range of 8 to 18 mg/L. For more challenging 1.0 μm MPs, at an initial concentration of 1.4 mg/L, biochar exhibited around 49.0 ± 1.2 % removal efficiency when exposed to wastewater, significantly outperforming traditional sand filters. Moreover, SCG-biochar accumulated at least 8.5 mg of 1.0 μm MPs per kg of biochar, equivalent to 1E+9 1.0-μm MP/kg. Notably, < 1.5 % of retained MPs were remobilized during post-filtration flushing. Microscopic analysis further revealed that MPs of various sizes were immobilized deep within the biochar's intricate pore structures, highlighting its potential as a robust and efficient solution for sustainable wastewater treatment, particularly in advanced filtration technologies.| File | Dimensione | Formato | |
|---|---|---|---|
|
versione open access - parte 1.pdf
accesso aperto
Descrizione: articolo - parte 1
Tipologia:
Versione editoriale (Publisher’s layout)
Licenza:
Creative commons
Dimensione
8.04 MB
Formato
Adobe PDF
|
8.04 MB | Adobe PDF | Visualizza/Apri |
|
versione open access - parte 2.pdf
accesso aperto
Descrizione: articolo - parte 2
Tipologia:
Versione editoriale (Publisher’s layout)
Licenza:
Creative commons
Dimensione
6.7 MB
Formato
Adobe PDF
|
6.7 MB | Adobe PDF | Visualizza/Apri |
|
1-s2.0-S2214714425003423-main_compressed.pdf
accesso aperto
Tipologia:
Versione editoriale (Publisher’s layout)
Licenza:
Creative commons
Dimensione
872.07 kB
Formato
Adobe PDF
|
872.07 kB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione



