In this study, we powered in series 4 triplets based on the pre-production ATLAS FE chip for HL-LHC. We ensured that the chosen operational parameters were within our theoretical specs and resulted in the stable operation of the modules within the serial power chain. Triplets were also powered in Low Power mode (LP), used to operate the module at a lower current, and their performance was tested without cooling requirements. The performance of the under-shunt and over-voltage protection were also analyzed.

Serial powering scheme and performance analysis for the innermost layer (L0) of ATLAS ITk modules / Samy, Md Arif Abdulla; Pianori, Elisabetta; Heim, Timon; Thompson, Emily Anne; Betta, Gian-Franco Dalla. - In: NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION A, ACCELERATORS, SPECTROMETERS, DETECTORS AND ASSOCIATED EQUIPMENT. - ISSN 0168-9002. - STAMPA. - 1063:169309(2024). [10.1016/j.nima.2024.169309]

Serial powering scheme and performance analysis for the innermost layer (L0) of ATLAS ITk modules

Samy, Md Arif Abdulla;Betta, Gian-Franco Dalla
2024-01-01

Abstract

In this study, we powered in series 4 triplets based on the pre-production ATLAS FE chip for HL-LHC. We ensured that the chosen operational parameters were within our theoretical specs and resulted in the stable operation of the modules within the serial power chain. Triplets were also powered in Low Power mode (LP), used to operate the module at a lower current, and their performance was tested without cooling requirements. The performance of the under-shunt and over-voltage protection were also analyzed.
2024
169309
Samy, Md Arif Abdulla; Pianori, Elisabetta; Heim, Timon; Thompson, Emily Anne; Betta, Gian-Franco Dalla
Serial powering scheme and performance analysis for the innermost layer (L0) of ATLAS ITk modules / Samy, Md Arif Abdulla; Pianori, Elisabetta; Heim, Timon; Thompson, Emily Anne; Betta, Gian-Franco Dalla. - In: NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION A, ACCELERATORS, SPECTROMETERS, DETECTORS AND ASSOCIATED EQUIPMENT. - ISSN 0168-9002. - STAMPA. - 1063:169309(2024). [10.1016/j.nima.2024.169309]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/425270
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
  • OpenAlex ND
social impact