General investigations on the heat treatment and thermal fatigue behavior of an experimental hot work tool steel tailored for laser powder bed fusion

An experimental hot work tool steel with a leaner chemistry compared to the standard AISI-H13 grade, aimed at enhanced processability, was gas atomized and processed using laser powder bed fusion (L-PBF) to >99.8 % relative density. The lower carbon content (∼0.25 wt% vs. ∼0.4 wt% in H13) resulted in a softer as-built (AB), and quenched martensite (∼485 HV1 vs. 625 HV1 in H13), higher martensite-start temperature (∼360 °C vs. 280–320 °C), and about ∼18 % reduction in dilatation, ascribed to the volume expansive martensitic transformation. Charpy V-notch impact toughness in AB condition (>30 J) was higher than those reported for AB H13. These features account for the improved L-PBF processability. The tempering response in comparison with a wrought H13, was characterized by a larger precipitation of thermally stable Mo- and V-rich secondary hardening alloy carbides at the expense of the easy-to-coarsen Cr-rich ones, attributed to the higher Mo and lower Cr content in experimental alloy....