Purpose To create computerized three-dimensional models of the crural fascia and of the superficial layer of the thoracolumbar fascia. Methods Serial sections of these two fasciae, stained with Azan-Mallory, van Gieson and anti-S100 antibody stains, were recorded. The resulting images were merged (Image Zone 5.0 software) and aligned (MatLab Image Processing Toolkit). Color thresholding was applied to identify the structures of interest. 3D models were obtained with Tcl/Tk scripts and Paraview 3.2.1 software. From these models, the morphometric features of these fasciae were evaluated with ImageJ. Results In the crural fascia, collagen fibers represent less than 20% of the total volume, arranged in three distinct sub-layers (mean thickness, 115 lm), separated by a layer of loose connective tissue (mean thickness, 43 lm). Inside a single sub-layer, all the fibers are parallel, whereas the angle between the fibers of adjacent layers is about 78°. Elastic fibers are less than 1%. Nervous fibers are mostly concentrated in the middle layer. The superficial layer of the thoracolumbar fascia is also formed of three thinner sub-layers, but only the superficial one is similar to the crural fascia sub-layers, the intermediate one is similar to a flat tendon, and the deep one is formed of loose connective tissue. Only the superficial sub-layer has rich innervation and a few elastic fibers. Discussion Computerized three-dimensional models provide a detailed representation of the fascial structure, for better understanding of the interactions among the different components. This is a fundamental step in understanding the mechanical behavior of the fasciae and their role in pathology. © 2011 Springer-Verlag.

3D reconstruction of the crural and thoracolumbar fasciae / Benetazzo, L.; Bizzego, A.; De Caro, R.; Frigo, G.; Guidolin, D.; Stecco, C.. - In: SURGICAL AND RADIOLOGIC ANATOMY. - ISSN 0930-1038. - 33:10(2011), pp. 855-862. [10.1007/s00276-010-0757-7]

3D reconstruction of the crural and thoracolumbar fasciae

Bizzego A.;
2011-01-01

Abstract

Purpose To create computerized three-dimensional models of the crural fascia and of the superficial layer of the thoracolumbar fascia. Methods Serial sections of these two fasciae, stained with Azan-Mallory, van Gieson and anti-S100 antibody stains, were recorded. The resulting images were merged (Image Zone 5.0 software) and aligned (MatLab Image Processing Toolkit). Color thresholding was applied to identify the structures of interest. 3D models were obtained with Tcl/Tk scripts and Paraview 3.2.1 software. From these models, the morphometric features of these fasciae were evaluated with ImageJ. Results In the crural fascia, collagen fibers represent less than 20% of the total volume, arranged in three distinct sub-layers (mean thickness, 115 lm), separated by a layer of loose connective tissue (mean thickness, 43 lm). Inside a single sub-layer, all the fibers are parallel, whereas the angle between the fibers of adjacent layers is about 78°. Elastic fibers are less than 1%. Nervous fibers are mostly concentrated in the middle layer. The superficial layer of the thoracolumbar fascia is also formed of three thinner sub-layers, but only the superficial one is similar to the crural fascia sub-layers, the intermediate one is similar to a flat tendon, and the deep one is formed of loose connective tissue. Only the superficial sub-layer has rich innervation and a few elastic fibers. Discussion Computerized three-dimensional models provide a detailed representation of the fascial structure, for better understanding of the interactions among the different components. This is a fundamental step in understanding the mechanical behavior of the fasciae and their role in pathology. © 2011 Springer-Verlag.
2011
10
Benetazzo, L.; Bizzego, A.; De Caro, R.; Frigo, G.; Guidolin, D.; Stecco, C.
3D reconstruction of the crural and thoracolumbar fasciae / Benetazzo, L.; Bizzego, A.; De Caro, R.; Frigo, G.; Guidolin, D.; Stecco, C.. - In: SURGICAL AND RADIOLOGIC ANATOMY. - ISSN 0930-1038. - 33:10(2011), pp. 855-862. [10.1007/s00276-010-0757-7]
File in questo prodotto:
File Dimensione Formato  
3D_reconstruction_of_the_crural_and_thor.pdf

Solo gestori archivio

Descrizione: Articolo principale
Tipologia: Versione editoriale (Publisher’s layout)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 1.61 MB
Formato Adobe PDF
1.61 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/279610
Citazioni
  • ???jsp.display-item.citation.pmc??? 26
  • Scopus 84
  • ???jsp.display-item.citation.isi??? 72
social impact