The influence of die wall lubrication during warm die compaction on densification, microstructure and mechanical properties of three low alloy ferrous powders was investigated. Specimens were sintered at 1250°C. Die wall lubrication leads to higher green and sintered density and enhances the dimensional stability. It does not affect the microstructure of the matrix, while pores are smaller and more rounded than in bulk lubricated specimens. In TRS tests, both strength and deformation are higher in die wall lubricated specimens than bulk lubricated ones.

Die Wall - Vs. Bulk Lubrication in Warm Die Compaction: Density, Microstructure and Mechanical Properties of Three Low Alloyed Steels / Zadra, M.; Girardini, L.; Pederzini, G.; Patuelli, G.; Piva, M.; Bordin, S.; De Mitri, L.; Popolizio, A.; Cristofolini, I.; Molinari, A.. - In: POWDER METALLURGY PROGRESS. - ISSN 1335-8987. - 2020:19(1)(2020), pp. 44-52. [10.1515/pmp-2019-0005]

Die Wall - Vs. Bulk Lubrication in Warm Die Compaction: Density, Microstructure and Mechanical Properties of Three Low Alloyed Steels

Popolizio A.;Cristofolini I.;Molinari A.
2020-01-01

Abstract

The influence of die wall lubrication during warm die compaction on densification, microstructure and mechanical properties of three low alloy ferrous powders was investigated. Specimens were sintered at 1250°C. Die wall lubrication leads to higher green and sintered density and enhances the dimensional stability. It does not affect the microstructure of the matrix, while pores are smaller and more rounded than in bulk lubricated specimens. In TRS tests, both strength and deformation are higher in die wall lubricated specimens than bulk lubricated ones.
2020
19(1)
Zadra, M.; Girardini, L.; Pederzini, G.; Patuelli, G.; Piva, M.; Bordin, S.; De Mitri, L.; Popolizio, A.; Cristofolini, I.; Molinari, A.
Die Wall - Vs. Bulk Lubrication in Warm Die Compaction: Density, Microstructure and Mechanical Properties of Three Low Alloyed Steels / Zadra, M.; Girardini, L.; Pederzini, G.; Patuelli, G.; Piva, M.; Bordin, S.; De Mitri, L.; Popolizio, A.; Cristofolini, I.; Molinari, A.. - In: POWDER METALLURGY PROGRESS. - ISSN 1335-8987. - 2020:19(1)(2020), pp. 44-52. [10.1515/pmp-2019-0005]
File in questo prodotto:
File Dimensione Formato  
[13394533 - Powder Metallurgy Progress] Die Wall - Vs. Bulk Lubrication in Warm Die Compaction Density, Microstructure and Mechanical Properties of Three Low Alloyed Steels.pdf

accesso aperto

Tipologia: Versione editoriale (Publisher’s layout)
Licenza: Creative commons
Dimensione 1.62 MB
Formato Adobe PDF
1.62 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/275597
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? ND
social impact