In comparison with metals and polymers, ceramics and/or carbon are more difficult to process into well-defined cellular architectures (e.g., cubic, tetrakaidecadehron, etc.) using Additive Manufacturing techniques. The present work reports a simple method for generating complex and precise SiCN ceramic lattices using a preceramic polymer and applying the replica approach to structures fabricated using stereolithography of plastic materials, with the associated ease of fabrication. Three-dimensional printed plastic lattices impregnated with a polysilazane were converted to SiCN by pyrolysis at 1000°C in inert atmosphere. In spite of the high amount of mass loss (~58%) and volume shrinkage (~65%), the impregnated structures did not collapse during pyrolysis, leading to highly porous (total porosity ~93 vol%) components possessing suitable strength for handling and potential use as lightweight components.
Polymer-derived SiCN cellular structures from replica of 3D printed lattices / Jana, P., Santoliquido, O., Ortona, A., Colombo, P., Sorarù, G.D.. - In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY. - ISSN 0002-7820. - 101:7(2018), pp. 2732-2738. [10.1111/jace.15533]
Polymer-derived SiCN cellular structures from replica of 3D printed lattices
Jana, Prasanta;Sorarù, Gian Domenico
2018-01-01
Abstract
In comparison with metals and polymers, ceramics and/or carbon are more difficult to process into well-defined cellular architectures (e.g., cubic, tetrakaidecadehron, etc.) using Additive Manufacturing techniques. The present work reports a simple method for generating complex and precise SiCN ceramic lattices using a preceramic polymer and applying the replica approach to structures fabricated using stereolithography of plastic materials, with the associated ease of fabrication. Three-dimensional printed plastic lattices impregnated with a polysilazane were converted to SiCN by pyrolysis at 1000°C in inert atmosphere. In spite of the high amount of mass loss (~58%) and volume shrinkage (~65%), the impregnated structures did not collapse during pyrolysis, leading to highly porous (total porosity ~93 vol%) components possessing suitable strength for handling and potential use as lightweight components.| File | Dimensione | Formato | |
|---|---|---|---|
|
205-Jana_et_al-2018-Journal_of_the_American_Ceramic_Society.pdf
Solo gestori archivio
Tipologia:
Versione editoriale (Publisher’s layout)
Licenza:
Tutti i diritti riservati (All rights reserved)
Dimensione
1.06 MB
Formato
Adobe PDF
|
1.06 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione



