Little has been published so far on the fabrication of porous ceramic films by using the Breath Figure method. In this work we explored the Breath Figure method to obtain ceramics with patterned surfaces. A UV cross-linkable polysiloxane was used to produce Breath Figures with tunable pore size. Pores formation, in terms of size and distribution on the polysiloxane films, were studied as a function of the concentration of the starting solution and time before UV irradiation. The polymeric breath figures were then pyrolyzed in controlled atmosphere to obtain, through the polymer-derived ceramic, PDCs, route the corresponding ceramic preserving the original porous surface. Pyrolysis under different gases, in particular air, nitrogen and ammonia, allows obtaining films of three different ceramic materials: silicon dioxide, SiO2, silicon oxycarbide, SiOC and silicon oxynitride, SiON respectively.

Breath figures decorated silica-based ceramic surfaces with tunable geometry from UV cross-linkable polysiloxane precursor / Carlomagno, Cristiano; Speranza, Giorgio; Aswath, Pranesh; Sorarù, Gian Domenico; Migliaresi, Claudio; Maniglio, Devid. - In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. - ISSN 0955-2219. - STAMPA. - 2018, 38:4(2018), pp. 1320-1326. [10.1016/j.jeurceramsoc.2017.10.005]

Breath figures decorated silica-based ceramic surfaces with tunable geometry from UV cross-linkable polysiloxane precursor

Carlomagno, Cristiano;Aswath, Pranesh;Sorarù, Gian Domenico;Migliaresi, Claudio;Maniglio, Devid
2018-01-01

Abstract

Little has been published so far on the fabrication of porous ceramic films by using the Breath Figure method. In this work we explored the Breath Figure method to obtain ceramics with patterned surfaces. A UV cross-linkable polysiloxane was used to produce Breath Figures with tunable pore size. Pores formation, in terms of size and distribution on the polysiloxane films, were studied as a function of the concentration of the starting solution and time before UV irradiation. The polymeric breath figures were then pyrolyzed in controlled atmosphere to obtain, through the polymer-derived ceramic, PDCs, route the corresponding ceramic preserving the original porous surface. Pyrolysis under different gases, in particular air, nitrogen and ammonia, allows obtaining films of three different ceramic materials: silicon dioxide, SiO2, silicon oxycarbide, SiOC and silicon oxynitride, SiON respectively.
2018
4
Carlomagno, Cristiano; Speranza, Giorgio; Aswath, Pranesh; Sorarù, Gian Domenico; Migliaresi, Claudio; Maniglio, Devid
Breath figures decorated silica-based ceramic surfaces with tunable geometry from UV cross-linkable polysiloxane precursor / Carlomagno, Cristiano; Speranza, Giorgio; Aswath, Pranesh; Sorarù, Gian Domenico; Migliaresi, Claudio; Maniglio, Devid. - In: JOURNAL OF THE EUROPEAN CERAMIC SOCIETY. - ISSN 0955-2219. - STAMPA. - 2018, 38:4(2018), pp. 1320-1326. [10.1016/j.jeurceramsoc.2017.10.005]
File in questo prodotto:
File Dimensione Formato  
Breath figures decorated silica-based ceramic surfaces with tunable geometry from UV cross-linkable polysiloxane precursor - 2018.pdf

Solo gestori archivio

Tipologia: Versione editoriale (Publisher’s layout)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 5.63 MB
Formato Adobe PDF
5.63 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/189812
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 13
  • ???jsp.display-item.citation.isi??? 12
social impact