Effect of anode thickness and Cu content on consolidation and performance of planar copper-based anode-supported SOFC

Planar, Cu-containing Gadolinia-doped ceria anode-supported solid oxide fuel cells to be used at intermediate temperature (500–750 °C) were produced in the present work. The Intermediate temperature solid oxide fuel cells were fabricated using Li2O as sintering aid for Gadolinia-doped ceria, varying the anode-to-electrolyte thickness ratio (r) from 2 to 10 and the CuO content in the anode from 45 vol% to 55 vol%. Co-sintering of the thermo-pressed green cells was carried out at 900 °C for 3 h. The electrolyte densification was favoured by increasing the r value, this being accounted for the enhanced compressive stresses induced by the supporting anode on the electrolyte upon sintering. Larger CuO content positively influences the overall cell performance, due to the improved electronic conductivity of the anode. Nevertheless, CuO concentration cannot exceed 50 vol% because of the tensile stresses (and corresponding flaws) generated in the electrolyte for larger amount. IT-SOFC containing 50 vol% CuO was characterized by an Open Circuit Voltage ≈0.82 V and a maximum power density of 200 mW cm−2 at 700 °C. © 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.