The strategies worldwide adopted nowadays for static and seismic rack design are based on approaches efficiently developed for the traditional carpentry frames, i.e. realized with hot-rolled bi-symmetric cross-section profiles. An open question is hence related to the effective degree of safety of these design rules when applied to racks, i.e. to structures realized by means of thin-walled cold-formed members, highly sensitive to second order effects. A study is currently in progress to define reliable seismic design procedures accounting for rack key features. In the framework of different planned activities, an ad hoc experimental equipment for testing full-scale racks under variable load conditions was developed. This paper presents the key features of the testing set-up, equipped with independent dynamic actuators, which allow applying vertical and horizontal loads.

A Testing Equipment for Seismic Studies of Steel Rack Frames / Baldassino, Nadia; Bernardi, Martina; Bernuzzi, Claudio; di Gioia, Arturo; Simoncelli, Marco. - ELETTRONICO. - 2425:(2022), pp. 120011-1-120011-4. (Intervento presentato al convegno ICNAAM 2020 tenutosi a Rhodes, Greece nel 17-23 September 2020) [10.1063/5.0081417].

A Testing Equipment for Seismic Studies of Steel Rack Frames

Nadia Baldassino;Martina Bernardi;
2022-01-01

Abstract

The strategies worldwide adopted nowadays for static and seismic rack design are based on approaches efficiently developed for the traditional carpentry frames, i.e. realized with hot-rolled bi-symmetric cross-section profiles. An open question is hence related to the effective degree of safety of these design rules when applied to racks, i.e. to structures realized by means of thin-walled cold-formed members, highly sensitive to second order effects. A study is currently in progress to define reliable seismic design procedures accounting for rack key features. In the framework of different planned activities, an ad hoc experimental equipment for testing full-scale racks under variable load conditions was developed. This paper presents the key features of the testing set-up, equipped with independent dynamic actuators, which allow applying vertical and horizontal loads.
2022
AIP Conference Proceedings 2425- International Conference of Numerical Analysis and Applied Mathematics ICNAAM2020
.
American Institute of Physics Inc.
9780735441828
Baldassino, Nadia; Bernardi, Martina; Bernuzzi, Claudio; di Gioia, Arturo; Simoncelli, Marco
A Testing Equipment for Seismic Studies of Steel Rack Frames / Baldassino, Nadia; Bernardi, Martina; Bernuzzi, Claudio; di Gioia, Arturo; Simoncelli, Marco. - ELETTRONICO. - 2425:(2022), pp. 120011-1-120011-4. (Intervento presentato al convegno ICNAAM 2020 tenutosi a Rhodes, Greece nel 17-23 September 2020) [10.1063/5.0081417].
File in questo prodotto:
File Dimensione Formato  
010_Simoncelli_2_ICNAAM.pdf

Solo gestori archivio

Descrizione: Articolo completo
Tipologia: Post-print referato (Refereed author’s manuscript)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 437.02 kB
Formato Adobe PDF
437.02 kB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/370008
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? ND
  • OpenAlex ND
social impact