Blend-based polymer electrolytes composed of PVDF-HFP/MG-49 (70/30) and LiClO 4 as lithium salt has been studied. Solution casting method was applied to prepare the polymer electrolyte. Electrochemical impedance spectroscopy (EIS) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the electrolyte films. The maximum value of 2.51×10 -6 S cm -1 was obtained at ambient temperature for the 30 wt. % of LiClO 4 and the conductivity increased to 1.10×10 -3 S cm -1 by increasing the temperature up to 383 K. FTIR spectra demonstrated that complexation occurred between the polymers and lithium salt.

Ionic Conductivity of PVDF-HFP/MG49 Based Solid Polymer Electrolyte / Ataollahi, N.; Ahmad, A.; Hamzah, H.; Rahman, M. Y. A.; Mohamed, N. S.. - (2012), pp. 29-33. (Intervento presentato al convegno 26th Regional Conference on Solid State Science and Technology, RCSSST 2011 tenutosi a Kuala Lumpur nel 22-24 November 2011) [10.4028/www.scientific.net/AMR.501.29].

Ionic Conductivity of PVDF-HFP/MG49 Based Solid Polymer Electrolyte

N. Ataollahi;
2012-01-01

Abstract

Blend-based polymer electrolytes composed of PVDF-HFP/MG-49 (70/30) and LiClO 4 as lithium salt has been studied. Solution casting method was applied to prepare the polymer electrolyte. Electrochemical impedance spectroscopy (EIS) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the electrolyte films. The maximum value of 2.51×10 -6 S cm -1 was obtained at ambient temperature for the 30 wt. % of LiClO 4 and the conductivity increased to 1.10×10 -3 S cm -1 by increasing the temperature up to 383 K. FTIR spectra demonstrated that complexation occurred between the polymers and lithium salt.
2012
Advanced Materials Research
Narges Ataollahi; Azizan Ahmad; H Hamzah; MYA Rahman; Mohamed Nor Sabirin
Switzerland
Trans Tech Publications Ltd
Ataollahi, N.; Ahmad, A.; Hamzah, H.; Rahman, M. Y. A.; Mohamed, N. S.
Ionic Conductivity of PVDF-HFP/MG49 Based Solid Polymer Electrolyte / Ataollahi, N.; Ahmad, A.; Hamzah, H.; Rahman, M. Y. A.; Mohamed, N. S.. - (2012), pp. 29-33. (Intervento presentato al convegno 26th Regional Conference on Solid State Science and Technology, RCSSST 2011 tenutosi a Kuala Lumpur nel 22-24 November 2011) [10.4028/www.scientific.net/AMR.501.29].
File in questo prodotto:
File Dimensione Formato  
AMR5-2012 (1).pdf

Solo gestori archivio

Descrizione: Main article
Tipologia: Versione editoriale (Publisher’s layout)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 458.22 kB
Formato Adobe PDF
458.22 kB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/348891
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 10
  • ???jsp.display-item.citation.isi??? 8
  • OpenAlex ND
social impact