Experimental research on wireless communication protocols frequently requires full access to all protocol layers, down to and including the physical layer. Software Defined Radio (SDR) hardware platforms, together with real-time signal processing frameworks, offer a basis to implement transceivers that can allow such experimentation and sophisticated measurements. We present a complete Orthogonal Frequency Division Multiplexing (OFDM) receiver implemented in GNU Radio and fitted for operation with an Ettus USRP N210. To the best of our knowledge, this is the first prototype of a GNU Radio based OFDM receiver for this technology. Our receiver comprises all layers up to parsing the MAC header and extracting the payload of IEEE802.11a/g/p networks. It supports both WiFi with a bandwidth of 20MHz and IEEE802.11p DSRC with a bandwidth of 10MHz. We validated and verified our implementation by means of interoperability tests, and present representative performance measurements. By making the code available as Open Source we provide an easy-to-access system that can be readily used for experimenting with novel signal processing algorithms.
An IEEE 802.11a/g/p OFDM Receiver for GNU Radio / Bloessl, Bastian; Segata, Michele; Sommer, Christoph; Dressler, Falko. - (2013), pp. 9-16. (Intervento presentato al convegno ACM SIGCOMM Workshop of Software Radio Implementation Forum tenutosi a Hong Kong, China nel 12 August 2013) [10.1145/2491246.2491248].
An IEEE 802.11a/g/p OFDM Receiver for GNU Radio
Michele Segata;
2013-01-01
Abstract
Experimental research on wireless communication protocols frequently requires full access to all protocol layers, down to and including the physical layer. Software Defined Radio (SDR) hardware platforms, together with real-time signal processing frameworks, offer a basis to implement transceivers that can allow such experimentation and sophisticated measurements. We present a complete Orthogonal Frequency Division Multiplexing (OFDM) receiver implemented in GNU Radio and fitted for operation with an Ettus USRP N210. To the best of our knowledge, this is the first prototype of a GNU Radio based OFDM receiver for this technology. Our receiver comprises all layers up to parsing the MAC header and extracting the payload of IEEE802.11a/g/p networks. It supports both WiFi with a bandwidth of 20MHz and IEEE802.11p DSRC with a bandwidth of 10MHz. We validated and verified our implementation by means of interoperability tests, and present representative performance measurements. By making the code available as Open Source we provide an easy-to-access system that can be readily used for experimenting with novel signal processing algorithms.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione
