Materials properties, among which thermody- namic ones, are influenced by microstructural features. This is so also in the case of nanocrystalline materials, featuring average grain size below 100 nm. A reduced grain size involves that significant fractions of atoms are localised in grain boundary regions and this has remarkable effects on the resulting thermodynamic properties, like heat capacity, tran- sition temperatures, coefficient of thermal expansion, etc. In the present work we consider the thermal expansion behaviour of ball-milled nanocrystalline metallic powders using dilato- metric measurements. High-energy ball-milling, that is capable to achieve extremely high deformation degrees, induces in the milled powders microstructural defects, like vacancies, antisites, dislocations and planar faults. Another effect of milling is the reduction of the crystallite size, that, in the long run, may reach the nanometric range. In view of the microstructural changes that can be brought about by milling and of the numerous transformations occurring during the dilatometric runs, a comparative study has been conducted on intermetallic, NiAl and Ni3Al, and on a pure metal, nickel, powders. The results emerging from the experimental inves- tigation are quite complex, owing to the complex defect structures that are present in the ball-milled powders. It turns out that the thermal expansion coefficient of the nanocrys- talline powders increases as the average grain size is reduced. However, when the average grain size achieves very low values, the strain relaxation of the crystalline lattice and the rearrangement of grain boundary regions result in a reduction of the thermal expansion coefficient. Another aspect that emerges from the dilatometric curves is the interplay between recrystallization and reordering, i.e. the re-establishment of the long-range order in the intermetallic powders, that had been partially or fully eliminated by ball-milling.

Effect of microstructure on thermal expansion behaviour of nanocrystalline metallic materials / Gialanella, Stefano; F., Marino. - In: JOURNAL OF MATERIALS SCIENCE. - ISSN 0022-2461. - ELETTRONICO. - 45:(2010), pp. 824-830.

Effect of microstructure on thermal expansion behaviour of nanocrystalline metallic materials

Gialanella, Stefano;
2010-01-01

Abstract

Materials properties, among which thermody- namic ones, are influenced by microstructural features. This is so also in the case of nanocrystalline materials, featuring average grain size below 100 nm. A reduced grain size involves that significant fractions of atoms are localised in grain boundary regions and this has remarkable effects on the resulting thermodynamic properties, like heat capacity, tran- sition temperatures, coefficient of thermal expansion, etc. In the present work we consider the thermal expansion behaviour of ball-milled nanocrystalline metallic powders using dilato- metric measurements. High-energy ball-milling, that is capable to achieve extremely high deformation degrees, induces in the milled powders microstructural defects, like vacancies, antisites, dislocations and planar faults. Another effect of milling is the reduction of the crystallite size, that, in the long run, may reach the nanometric range. In view of the microstructural changes that can be brought about by milling and of the numerous transformations occurring during the dilatometric runs, a comparative study has been conducted on intermetallic, NiAl and Ni3Al, and on a pure metal, nickel, powders. The results emerging from the experimental inves- tigation are quite complex, owing to the complex defect structures that are present in the ball-milled powders. It turns out that the thermal expansion coefficient of the nanocrys- talline powders increases as the average grain size is reduced. However, when the average grain size achieves very low values, the strain relaxation of the crystalline lattice and the rearrangement of grain boundary regions result in a reduction of the thermal expansion coefficient. Another aspect that emerges from the dilatometric curves is the interplay between recrystallization and reordering, i.e. the re-establishment of the long-range order in the intermetallic powders, that had been partially or fully eliminated by ball-milling.
2010
Gialanella, Stefano; F., Marino
Effect of microstructure on thermal expansion behaviour of nanocrystalline metallic materials / Gialanella, Stefano; F., Marino. - In: JOURNAL OF MATERIALS SCIENCE. - ISSN 0022-2461. - ELETTRONICO. - 45:(2010), pp. 824-830.
File in questo prodotto:
File Dimensione Formato  
2010_CTE_nX_JMSCI_45_824_830.pdf

Solo gestori archivio

Tipologia: Versione editoriale (Publisher’s layout)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 190.79 kB
Formato Adobe PDF
190.79 kB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/76943
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 5
  • ???jsp.display-item.citation.isi??? 4
social impact