In this work we showed the optimization of the spectral response of several optical elements in a silicon-based optical switch. Integrated thermal resistors induced a local heating of the components. The temperature increase, in turn, caused a thermal shift of the optical response of the component. In this manner, we aligned interleavers and micro-ring resonators to the International Telecommunication Union (ITU) channels, by using a stochastic method named Globalized Bounded Nelder-Mead (GBNM) to determine the proper temperatures. The optimization engine relied on the optical feedback from on-chip monitor photodiodes to drive these photonic elements into the wanted functioning condition. This method is suited for restoring the spectral response of optical elements impaired by fabrication inaccuracies. In the same way, it can be applied to tune in resonance active components, whose transfer function has one or more local optima. We proved the reliability of the GBNM method for the optimization of an integrated optical switch, with more than thousand optical components, each one interfaced with a thermal resistor driven by a dedicated electronic circuit. On the one hand, the GBNM guaranteed the automatic alignment of all active components on the chip, over multiple instances. On the other hand, the method allowed for the proper working of such a complex device.

Automatic initialization methods for photonic components on a silicon-based optical switch / Tondini, S.; Castellan, C.; Medina, M. A.; Pavesi, L.. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 9:9(2019), p. 1843. [10.3390/app9091843]

Automatic initialization methods for photonic components on a silicon-based optical switch

Pavesi L.
2019-01-01

Abstract

In this work we showed the optimization of the spectral response of several optical elements in a silicon-based optical switch. Integrated thermal resistors induced a local heating of the components. The temperature increase, in turn, caused a thermal shift of the optical response of the component. In this manner, we aligned interleavers and micro-ring resonators to the International Telecommunication Union (ITU) channels, by using a stochastic method named Globalized Bounded Nelder-Mead (GBNM) to determine the proper temperatures. The optimization engine relied on the optical feedback from on-chip monitor photodiodes to drive these photonic elements into the wanted functioning condition. This method is suited for restoring the spectral response of optical elements impaired by fabrication inaccuracies. In the same way, it can be applied to tune in resonance active components, whose transfer function has one or more local optima. We proved the reliability of the GBNM method for the optimization of an integrated optical switch, with more than thousand optical components, each one interfaced with a thermal resistor driven by a dedicated electronic circuit. On the one hand, the GBNM guaranteed the automatic alignment of all active components on the chip, over multiple instances. On the other hand, the method allowed for the proper working of such a complex device.
2019
9
Tondini, S.; Castellan, C.; Medina, M. A.; Pavesi, L.
Automatic initialization methods for photonic components on a silicon-based optical switch / Tondini, S.; Castellan, C.; Medina, M. A.; Pavesi, L.. - In: APPLIED SCIENCES. - ISSN 2076-3417. - 9:9(2019), p. 1843. [10.3390/app9091843]
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/254365
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 9
  • ???jsp.display-item.citation.isi??? 7
social impact