The linear shrinkage during isothermal treatment in the early stages of conventional and field‐assisted sintering of 8YSZ was analyzed. The results reveal thatthe application of a moderate electric current causes a remarkable acceleration ofthe self‐diffusion kinetics, resulting in an enhanced densification. In addition,when an electric current is applied, two different field‐assisted sintering regimescan be identified. The first one, observed at low currents (ie 5 mA/mm2), is associated to sintering shrinkage which follows the conventional trend (ɛαt1=3)although the densification is accelerated. The second regime takes place when larger current are applied (J > 10 mA/mm2) and is described by a different sinteringlaw,ɛαt1=7, this pointing out that the electric current causes the activation ofalternative densification mechanisms when it exceeds a certain threshold value.

Electric current effect during the early stages of field-assisted sintering / Biesuz, Mattia; Rizzi, Davide; Sglavo, Vincenzo M.. - In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY. - ISSN 0002-7820. - STAMPA. - 2019, 102:2(2019), pp. 813-822. [10.1111/jace.15976]

Electric current effect during the early stages of field-assisted sintering

Biesuz, Mattia;Sglavo, Vincenzo M.
2019-01-01

Abstract

The linear shrinkage during isothermal treatment in the early stages of conventional and field‐assisted sintering of 8YSZ was analyzed. The results reveal thatthe application of a moderate electric current causes a remarkable acceleration ofthe self‐diffusion kinetics, resulting in an enhanced densification. In addition,when an electric current is applied, two different field‐assisted sintering regimescan be identified. The first one, observed at low currents (ie 5 mA/mm2), is associated to sintering shrinkage which follows the conventional trend (ɛαt1=3)although the densification is accelerated. The second regime takes place when larger current are applied (J > 10 mA/mm2) and is described by a different sinteringlaw,ɛαt1=7, this pointing out that the electric current causes the activation ofalternative densification mechanisms when it exceeds a certain threshold value.
2019
2
Biesuz, Mattia; Rizzi, Davide; Sglavo, Vincenzo M.
Electric current effect during the early stages of field-assisted sintering / Biesuz, Mattia; Rizzi, Davide; Sglavo, Vincenzo M.. - In: JOURNAL OF THE AMERICAN CERAMIC SOCIETY. - ISSN 0002-7820. - STAMPA. - 2019, 102:2(2019), pp. 813-822. [10.1111/jace.15976]
File in questo prodotto:
File Dimensione Formato  
Biesuz_et_al-2018-Journal_of_the_American_Ceramic_Society.pdf

Solo gestori archivio

Descrizione: articolo completo
Tipologia: Versione editoriale (Publisher’s layout)
Licenza: Tutti i diritti riservati (All rights reserved)
Dimensione 1.47 MB
Formato Adobe PDF
1.47 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11572/222704
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 17
  • ???jsp.display-item.citation.isi??? 15
social impact