Process performance optimization and mathematical modelling of a SBR-MBBR treatment at low oxygen concentration

In this study, performances of a SBR-MBBR in terms of COD, TN removal efficiency and sludge production were compared to that of an A/O-MBBR. The SBR-MBBR (40% filling ratio) at 24, 18 and 12 h HRT had a COD and TN removal efficiencies of 88 and 75%, 92 and 72%, 90 and 47%. Increasing the filling ratio to 60% with 12 h HRT, the COD and TN removal efficiencies raised to 93% and 66%, respectively. Thus, increasing the filling ratio of the MBBR the TN removal was improved. The A/O-MBBR configuration achieved a COD and TN removal effi- ciencies, respectively, of 85% and 72%. This configuration obtained the highest sludge yield due to an increase of the sludge production. Nitrification and denitrification activity tests, performed on attached and suspended biomass, revealed a specialization of the microbial community with the suspended biomass responsible for the denitrification process while the attached biomass for the nitrification. Moreover, a mathematical model consisting of a system of impulsive ordinary differential equations was developed to simulate the SBR-MBBR process. The mathematical model was successfully calibrated and vali- dated through the collected experimental data, resulting in a suitable tool for process efficiency prediction and optimization of operational process conditions.